GE Monogram ZDBR240 Owner's Manual page 8

Controls and Features
Beverage ( enler
7bmpoature
control
Tile operating temperatures of tile
bexerage center range from 40°F to 6a 1_.
Do not install tile bmerage center where
tile temperature will go below 55°F or
0
aboxe 90 1_.
The mmperature display shows tile actual
temperature of tile beverage centen Tile
actual temperature may vat T slightly flom
the set temperature based on factors such
as door openings, amount of beverages
and room temperature. Alter making
adjustments, allow 19 m 94 hours for tile
beverage center to reach tile mmperature
you have set and before making ally
fllrther adjustments. The factor T setting
is 45°E
To change the temperature settings,
press the + and - pads until you reach
the desired set temperature. Alter several
seconds, tile display will return to tile
actual temperatm_e. The actual temperature
will be displayed while tile unit moxes
toward the set temperature.
Allow 12 to 24 hours for tile beverag_
center to reach tile temperature you have
set and before making ally adjustments
to the initial setting.
TEMP. CONTROL
WARMER COLDER
Child control
lockout
This child control lockout tbature
prexents unwanted changes to your
ten_peratuie settings.
'After tile desired temperature is set the
temperature can be locked. To lock, press
both the + and - pads at tile same time tbr
five seconds. To unlock, press both + and
- pads t_r five seconds.
Interior light
and light pad
The interior light makes it easy to xiew
your bexerage labels and enhances the
display of your collection.
When tile pad is depressed and tile word
ON is displayed, tile light will remain on
for one hour before automatically turning
off. When the pad is depressed and the
word OFF is displayed, tile light will come
on only when the door is opened. For best
viewing, do not store a bottle on tile top
shelf directly under tile light. Remember
m turn off the light when it is no longer
needed.