Craftsman 917.272451 Owner's Manual page 21

Lawn tractor 21.5 hp, 42" mower electric start 6 speed transaxle
Table of Contents

Advertisement

_
WARNING:
SERIOUS
BEFORE
PERFORMING
ANY
TO AVIOD
INJURY,
SERVICE
OR ADJUSTMENTS:
1. Depress clutch/brake
pedal fully and set parking brake.
2.
Place gearshift lever in neutral (N) position.
3.
Place attachment clutch
in "DISENGAGED"
position.
4. Turn ignition key =OFF" and remove key.
5.
Make sure the blades and all moving parts have completely stopped.
6.
Disconnect spark plug wire from spark plug and place wire where it cannot
come in contact with plug.
TRACTOR
TO REMOVE
MOWER
Mower will be easier to remove from the
right side of tractor.
1.
Place attachment clutch in "DISEN-
GAGED"
position.
2.
Move attachment lift lever forward to
IMPORTANT: If an attachment other than
the mower deck is to be mounted on the
tractor, remove the front links and hook
the clutch spring Into square hole in
frame.
TO INSTALL MOWER
lower mower to its lowest position.
3.
Roll belt off engine pulley.
4.
Remove
small retainer
spring,
and lift
clutch spring off pulley bolt.
5.
Remove
large retainer
spring,
slide
collar off and push housing
guide out
of bracket.
6.
Disconnect
anti-sway
bar from chassis
bracket
by removing
retainer
spring.
7.
Disconnect
suspension
arms from
rear deck brackets
by removing
retainer
springs.
8. Disconnect
front links from deck by
removing
retainer springs.
9.
Raise lift lever to raise suspension
arms. Slide mower out from under
tractor.
1. Raise attachment
lift lever to its
highest
position.
2. Slide mower under tractor
with
deflector
shield to right side of tractor.
3.
Lower lift lever to its lowest position.
4. Connect front links to mower deck and
secure with retainer springs.
5.
Connect suspension arms to rear
deck brackets and secure with
retainer springs.
6. Connect anti-sway bar to chassis
bracket and secure with retainer
spring.
7.
Push clutch cable housing guide into
bracket, slide collar onto guide and
secure with large retainer spring.
8.
Install belt onto engine pulley.
Small Retainer Spring
-z • ,.,.._""---_
Square Hole
Suspension Arms
,. j
Engine Pulley
Clutch
Anti-Sway
Springs
(Both Sides)
Housing Guide
Bracket
Large Retainer Spring
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents