Table of Contents
Advertisement
KNOW YOUR CART
TAILGATE
TOOL BOX
LATCH STEP BRACKET
/
LATCH LOCK BRACKET
HITCH PiN
/
TOOL BOX
LATCH LOCK BRACKET
LATCH STEP BRACKET
HITCH PIN
TAILGATE
Allows small tools or other equipment to be stored.
Secures the cart bed to the tongue.
Unlocks the latch lock bracket when stepped on.
Used to attach cart to tractor.
Holds material inside cart during transport. Removing allows cart to be dumped.
HOW TO USE YOUR
PROFESSIONAL
POLY CART
DO NOT EXCEED 800 LB. CAPACITY OF CART
One cubic foot of dirt weighs approximately 80 Ibs.
CAUTION: Vehicle braking and stability may
be affected with the addition of an accessory
or attachment, be aware of changing
conditions on slopes.
•
The maximum towing speed for this cart is 10 m.p.h.
Refer to vehicle owners manual for instructions on
safe operation on slopes.
Use slope guide provided on page 9 of this manual to
determine whether a slope angle is too steep for safe
operation.
Always test to make sure your tractor has adequate
towing and braking capabilities whenever hauling a
substantial amount of weight in your cart. Use extra
caution when operating on slopes.
For best handling and traction, distribute the weight of
the load evenly in the cart.
To dump material from the cart, remove the tailgate
from rear of cart and then step down on latch step
bracket. After emptying, pull the front of the bed down
toward the cart tongue until the latch snaps into
place. Reinstall tailgate.
CAUTION: To avoid possible injury, be sure
no one is near cart before releasing latch.
Call 1-866-576-8388
for missing parts or assembly help
7
DO NOT RETURN TO STORE
Advertisement
Table of Contents
