Prints - Olympus SZ-31MR Instruction Manual

Remove the Eye-Fi card from the camera or select
[Off] for [Eye-Fi] in airplanes and other locations in
which use is prohibited.
This camera does not support the Eye-Fi card's
Endless mode.
Saving print settings to the image data Saving print settings to the image data
[Print Order] [Print Order]
x (Settings Menu 1)
"Print Reservations (DPOF)" (p. 59)
Print reservation can be set only for still images that
are recorded to the card.
Selecting a method for connecting Selecting a method for connecting
the camera to other devices the camera to other devices
[USB Connection] [USB Connection]
x (Settings Menu 1)
Submenu 2
When the camera is connected to
Auto another device, the settings selection
screen is displayed.
Select when connecting the camera
Storage
to a computer via a storage device.
Select when transferring images
without using the supplied [ib] (PC
MTP
software) on Windows Vista/
Windows 7.
Select when connecting to a
Print
PictBridge-compatible printer.
For information on using the menus, see "Setup menu" (p. 8).
Print Order
USB Connection
Application
System requirements System requirements
Windows : Windows XP Home Edition/
Professional (SP1 or later)/
Vista/Windows 7
Macintosh : Mac OS X v10.3 or later
When using another system other than Windows XP
(SP2 or later)/Windows Vista/Windows 7, set to
[Storage].
Even if a computer has USB ports, proper operation
is not guaranteed in the following cases:
●
Computers with USB ports installed using an
expansion card, etc.
●
Computers without a factory-installed OS and
home-built computers
Turning on the camera with the q
Turning on the camera with the
q Power On]
button [ button [q Power On]
x (Settings Menu 1)
Submenu 2
The camera is not turned on. To turn
on the camera, press the n
No
button.
Press and hold the q button to turn
Yes
the camera on in the playback mode.
q
q Power On
Application
EN
49