Af Target Mark - Olympus SZ-31MR Instruction Manual

Setting the Touch Shutter function Setting the Touch Shutter function
[Touch Shutter] [Touch Shutter]
z (Camera Menu 1)
Submenu 2
The subject that is touched is
On focused on and the picture is taken
automatically.
The subject that is touched is AF
Off locked. (Press the shutter button
manually.)
This setting can also be changed by touching the
panel. "Using for the shooting mode" (p. 9)
Selecting the focusing area [AF Mode] Selecting the focusing area [AF Mode]
z (Camera Menu 1)
Submenu 2
The camera focuses automatically.
(If a face is detected, it is shown by
a white frame
button is pressed halfway and the
Face/iESP
*1
camera focuses, the frame turns to
green *2
camera chooses a subject in the
frame and focuses automatically.)
The camera focuses on the subject
Spot
located within the AF target mark.
The camera tracks the subject
AF Tracking movement automatically to focus on
it continuously.
For some subjects, the frame may not appear or may
*1
take some time to appear.
If the frame blinks in red, the camera cannot focus.
*2
Try refocusing on the subject.
For information on using the menus, see "Setup menu" (p. 8).
Touch Shutter
Application
AF Mode
Application
; when the shutter
*1
. If no face is detected, the
To focus on a moving subject To focus on a moving subject
continuously (AF Tracking) continuously (AF Tracking)
1 Hold the camera to align the AF target mark on the
subject and press the A button.
2 When the camera recognizes the subject, the AF
target mark automatically tracks the subject movement
to focus on it continuously.
3 To cancel the tracking, press the A button.
Depending on the subjects or the shooting conditions,
the camera may be unable to lock the focus or fail to
track the subject movement.
When the camera fails to track the subject movement,
the AF target mark changes to red.
Selecting the method for measuring the Selecting the method for measuring the
n ] ]
brightness [ESP/n brightness [ESP/
z (Camera Menu 1)
Submenu 2
Shoots to obtain a balanced
brightness over the entire screen
ESP (Meters the brightness at the center
and surrounding areas of the screen
separately).
Shoots the subject at the center
during backlighting (Meters the
5 (spot)
brightness at the center of the
screen).
When set to [ESP], the center may appear dark when
shooting against strong backlighting.
ESP/n
Application
EN
39