Advertisement
Available languages
Available languages
CUSTOMER RESPONSIBILITIES
SERVICE
RECORDS
Fill in dates as
you complete
regular service
ii
Before After
Each
first2
Uso
Houm
T{gh_n
All Screws and Nuts
p4
v_
Lubflcale Ttne Sha|t
tf
Lubr{cate Transmission
S_k
Rug
Cie__d R_-Oii Aircie_ei Fiiiei
ioy!!o.o,
Drain Fue!
SCHEDULE
_=ry
Every Before IBefore
75
Slorago Each
Hours
Hours
S_son
v'
v"
v"
SERVICE
DATES
,, ,,,, .....
GENERAL
RECOMMENDATIONS
The warranty on this mini tiller/cultivator
does not cover items that have been sub-
jected to operator abuse or negligence,.To
receive full value from the warranty, the op
erator must maintain the mini tiller/cultivator
as instructed in this manual, The above
chart is provided to assist the operator in
properly maintaining the mini ti[ler/cuft{vator_
LUBRICATION
Every 25 hours and!or at the beginning of
each season, the gear box should be _led
with lubricant° Tubes of gear lubricant are
available from most automotive supply
stores, Use portable tool grease such as
Lubriplate 630AA (Product No. 06787, !-3/4
oz, tube) or Lubriplate GR-132 (Product No.
15892, t0 oz. tube),, The tine shaft should
have oil applied to it before storage and af-
ter it is cleaned by flushing it with water.
The illustration to the right is provided to as-
sist the operator in properly maintain{ng the
mini tiller/cultivator.
CAUTION:
Allow the transmissionto
cool before fillingwith grease.
• Remove both left side tines_See Servlce
and Adjustments section in this manual
• Remove the air vent screw from the top
left side ot the transmission.
Using a grease gun, fillthe transmission
through the grease fittinguntil the new
grease begins to come out of the air vent
screw hole,
• Reinstall the air vent screw.
- Check the condition of the felt washer in
the side of the transmission at the tine
shaft. Replace the felt washer if it is
damaged (see Repair Parts section in
this manual).
• Clean tine shaft and spread a few clrops
of oil on shaft in fine replacement areas,
Reinstall the tines°
• Remove the right side tines. Check the
felt washer for damage, clean and oil the
line shaft, Reinstall the tines.
Transmission
Air VentScrew,
Felt Washer
Grease
fitting
(Lub_cate
the gear
boxwith
{Oil the line
shaft before storage and
Lubriplate
aftercleaning, i f the mini
GRd 32
tiller/cultivator is flushed
withwater)
View of Left Side With Tines Removed
Advertisement
