Accessories - Craftsman 247.794510 Owner's Manual

• Make certain pumpis mountedand aligned
propedy.
• Use a flexible "spider" type couplingbetween
engine and pumpdriveshafts.
• Keep hoses clear and unblocked.
Bleed air out of hoses beforeoperating.
• Flush and clean hydraulicsystem beforestart-
up after any malfunctionor servicing.
• Use "pipe dope"on all hydraulicfittings.
• Allow time for warm-upbefore splittingwood.
• Prime the pump beforeinitialstart-upby turning
over the engine with spark plug disconnected.
Splitwoodwith the grain(lengthwise)only.
Never:
Use whenfluid is below20 ° F, or above 150° F.
• Use a solidengine/pumpcoupling.
• Forcepumpwhen mounting.
• Operate through reliefvalve.
• Attemptto adjustunloading or reliefvalve
settingswithoutpressuregauges.
Operate with air in hydraulic system.
UseTeflon tape on hydraulicfittings.
• Attemptto cutwoodacros s the grain.
These accessodes were available when the log splitterwas purchased. These are also availableat mostSears
retailoutlets,catalog and service centers. Most Sears storescanorder repairparts for you when you providethe
modelnumber of yourlog splitter.
Stabilizer
Gasoline Can
Tailight Kit