Self-Cleaning - Frigidaire CGLEFM97DSF Use & Care Manual

Es510 control, self-cleaning oven with ceramic cooktop & bake-n-warm double oven
Table of Contents

Advertisement

Self-Cleaning
The SPEED CLEAN _,
CLEAN _
& MAXX CLEAN _
pads are used to start a Self-Cleaning cycle. When used with
START TIME _
pad, a delayed Self-Cleaning cycle may also be programmed.
This feature allows for any Self-Cleaning
cycle times from 2 hours (using Speed Clean), 3 hours (using Clean) to 4 hours (using Maxx Clean).
During the Self-Cleaning cycle, the outside of the range can become very hot to the touch. DO NOT leave
small children unattended near the appliance.
DO NOT force the oven door open. This can damage the automatic door locking system. Use care when
opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or
steam to escape.
The oven may still be VERY HOT.
INSTRUCTIONS
PRESS
DISPLAY
To start an immediate Self-Cleaning
cycle or to set a delay
start time of 9:00 o'clock and shut off automatically (example
provided is a default 3 hour Self-Clean cycle):
1.
Be sure the clock is set with the correct time of day, the oven is
empty and the oven door is closed.
2.
Press _.
"CLEAN"
will flash, "3:00" (hours) and the Cooktop
locked icon will show in the display (See Fig. 1). Note: 2 hours
of Self-Cleaning time may be choosen by pressing @
or 4
hours by pressing the @
at this time.
3.
Press O
.The "DOOR LOCKED" icon will flash; "CLEAN",
Cooktop Lockout icon and the letters "CLn" will remain on in
the display (Fig. 2).
4.
As soon as the control is set, the motor driven oven door lock
will begin to close automatically.
Once the door has been
locked the "DOOR LOCKED" indicator light will quit flashing
and remain on. The Cooktop locked icon will remain on (Fig. 3).
or
@,@optional.
@
Fig. 1
Fig. 2
Fig. 3
NOTE:
If the optional
delay Self-Clean
feature
is needed,
finish
steps
5-7. If Self-Clean
is started
immediately
skip the remaining
steps and continue
with "When
the Self-Clean
cycle
is done"
on the following
page.
5.
Press _
(See Fig. 4). Enter the desired Self-Clean starting
time using the number pads @
_
@
(See Fig. 5).
6.
PressO.
"DELAY", "DOOR LOCKED", "CLEAN"and
Cooktop locked icons will remain on.
7.
The control will calculate forward from the set start time to
determine when the Self-Cleaning cycle should end. The Self-
Cleaning cycle will turn on automatically
at the set time. At that
time the icon "DELAY" will go out; the oven icon will come on,
the start time, Cooktop locked icon, "CLEAN" and "CLn" will
remain in the display (See Fig. 6).
©
G@@
0
33
Fig. 4
Fig. 5
Fig. 6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents