Permanent Mounting - Craftsman 152.241180 Owner's Manual

WORK LIGHT (Fig. J)
The Bench Grinder is provided with a Flexible Work
Light to assist in visibility of the workpiece.
The Bench Grinder is NOT provided with a light bulb for
the Flexible Work Light.
To reduce the risk of fire, use a 120 volt, 40 Watt or
less Track Light Bulb, Type R20, medium base or
equivalent (not included). DO NOT use a light bulb that
extends past the end of the light housing.
The Flexible Work Light may be turned "ON" or "OFF"
by using the rotary switch (B) on the top surface of the
housing (A). The switch can be rotated in the clockwise
direction only. See Figure J.
NOTE: The Flexible Work Light can be turned "ON" or
"OFF" even if the Bench Grinder is turned "OFF".
CAUTION: The Flexible Work Light housing will remain
hot for a few minutes after turning it "OFF". Avoid
contact with housing until it is cool.
Fig. J B
A
PERMANENT MOUNTING (Fig. K)
You should firmly attach the Bench Grinder to a solid
work surface, hardware not included.
Fig. K
If the Bench Grinder is not securely mounted, it will
have the ability to move or tip over during grinding
operations and possibly cause the operators fingers to
contact the grinding wheels.
10