Assembly, operating instructions & parts list 1/3 h.p. grinder split phase, 115 volts, 60 cycle, 3450 r.p.m (6 pages)
Summary of Contents for Craftsman 152.22018
152.220180 CAUTION: FOR YOUR OWN SAFETY; Read and follow ® all of the Safety and Operating Instructions before Operating this Bench Grinder Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Part No. OR94750 10-in. Wheel 1 Horsepower (continuous duty) 1725 R.P.M.
Read this manual to understand this Bench Grinder. DO NOT operate this Bench Grinder if you do not fully understand the limita- tions of this tool. DO NOT modify this Bench Grinder in any way. BEFORE USING THE BENCH GRINDER...
SAFETY INSTRUCTIONS 17. DO NOT STAND ON A TOOL. Serious injury could result if the tool tips over or you accidentally contact the tool. 18. DO NOT store anything above or near the tool where anyone might try to stand on the tool to reach it.
4. DO NOT STAND IN FRONT OF THE BENCH GRINDER WHEN STARTING IT. Stand to one side of the Bench Grinder and turn it “ON”. Wait at the side for one minute until the grinder comes up to full speed. There is always a possibility that debris from a damaged grinding wheel may be discharged towards the operator.
“ON” the Bench Grinder. The Fig. C CARTON CONTENTS Bench Grinder can only be turned “ON” after all the parts have been obtained and installed correctly. The following items are to be provided in the shipping box: A.
8" Grinding Wheel (not shown). 13. QUENCH TRAY - Used to cool workpiece after grinding. 14. MOUNTING PAD - Used to secure the grinder to a workbench or suitable work surface. 15. GRINDING WHEEL IDENTIFICATION LABEL - Provides information on wheel size, grit and maxi- mum RPM.
Tool Rest Assemblies and the Spark Arrestor Assemblies. WARNING • DO NOT assemble the Bench Grinder until you are sure the tool IS NOT plugged in. • DO NOT assemble the Bench Grinder until you are sure the power switch is in the “OFF”...
WORK LIGHT The Bench Grinder is provided with a Flexible Work Light to assist in visibility of the workpiece. The Bench Grinder is NOT provided with a light bulb for the Flexible Work Light. WARNING To reduce the risk of fire, use a 120V, 40 watt Type A or smaller bulb, medium base.
1. The Power Switch must be in the “OFF” position. 2. Stand to the side of the Bench Grinder and plug in the power cord to the correct power source. 3. Remain to the side of the Bench Grinder and turn it “ON”...
8. CAUTION: The new abrasive wheel to be put on the Bench Grinder must have a higher R.P.M rating than the Bench Grinder. The label on the side of the abrasive wheels must stay on, DO NOT remove this label.
8-IN. PROFESSIONAL BENCH GRINDER PARTS LIST WARNING When servicing, use only CRAFTSMAN replacement parts. Use of any other parts may create a HAZARD or cause product damage. WARNING Any attempt to repair or replace electrical parts on this Bench Grinder may create a HAZARD unless repair is done by a qualified service technician.
8-IN. PROFESSIONAL BENCH GRINDER PARTS LIST MODEL NO. 152.220180...
10-IN. PROFESSIONAL BENCH GRINDER PARTS LIST WARNING When servicing, use only CRAFTSMAN replacement parts. Use of any other parts may create a HAZARD or cause product damage. WARNING Any attempt to repair or replace electrical parts on this Bench Grinder may create a HAZARD unless repair is done by a qualified service technician.
10-IN. PROFESSIONAL BENCH GRINDER PARTS LIST MODEL NO. 152.220600...
Get it fixed, at your home or ours! For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself.