Olivetti d-Copia 18MF Operation Manual page 70

Troubleshooting
Message
Insert Cassette1.
Insufficient memory.
Unable to start job.
KPDL error.
Job is canceled.
####
Load paper in Cassette1.
Size # Type #
Load paper in Cassette2.
Size # Type #
Load paper in
MP Tray.
Size # Type #
Memory overflow.
Part of the job end is printed.
Paper Jam at Cassette1.
Paper Jam at Cassette2.
Paper Jam at MP Tray.
Paper Jam at Document
Processor.
Paper Jam in Printer.
Place original and press Start
key.
Print overrun.
This page isn't complete.
Remove original from
Document Processor.
6-4
The paper feeder was selected, but cassette 1 is not
installed properly.
Push the upper cassette securely into the machine.
Memory shortage occurred during processing of other
jobs.
Current print processing cannot continue.
If you want to cancel printing, press right Select. If Auto
Error Clear is set to On, printing will be automatically
resumed after a preset period of time.
There is no paper in the indicated cassette. Press right
Select.
If you have loaded paper in the cassette, select Print
(Continue) and press Enter.
To switch to another paper feed location, select Paper
select and press Enter.
The available paper feed locations will be displayed.
Select the desired paper feed location and press Enter.
The machine's memory is full. Press left Select to cancel
the copying procedure. Pressing right Select after a part
of the job being processed is printed will end the job.
Insert fewer originals and try to copy again.
To add expansion memory, contact your service
representative or authorized service center.
A paper jam has occurred. Press left Select to display
the online help messages and remove the jammed
paper.
The machine will attempt to make copies from any
originals that remain uncopied.
Reposition the original on the platen or in the document
feed tray and try to copy again.
The data transferred to the machine was too complex to
print on a page.
To continue printing, press right Select. To cancel
printing, press left Select.
This appears if there is a document in the document
processor when the power is turned on. It also appears
when the paper has jammed while being fed from the
document processor because of the way it was placed.
Remove all the document pages inside the document
processor, and set them again correctly.
Procedure Reference
—
—
Advanced
Operation
Guide
page 2-1
Advanced
Operation
Guide
page 6-7
—
—
page 6-10
OPERATION GUIDE