Table of Contents
Advertisement
Creating a Striped Array
MediaShield can be used to create a striped array from one disk up to the maximum
supported number of disks in the system.
To create a two-disk Striped Array do the following:
1 Make sure the drives that you want to use are RAID-enabled in the system BIOS.
2 Select the Custom option in the MediaShield Create Wizard.
3 :Click Next and the following screen shot will appear:
Figure 3.16
NVIDIA Corporation
RAID Array Selection Page
Using the NVIDIA MediaShield RAID Management Utility
C
3
HAPTER
47
Advertisement
Table of Contents
