Advertisement
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN• For satisfactory use ofyour oven, become familiar with
the various pad functions of the oven as described below.
CLOCK
BAKE TIME
UP and DOWN ARROW PADS--
Used along
BAKE PAD--Used
PAD--
Used
PAD--
Used to
with the function
pads to select oven
to select the bake
to set the
enter the length of
temperature,
cook time, start time (when
function.
time of d_
the bakinc time.
programming
an automatic
start time), time of
day, clean
timer.
SPEED CLEAN
(SELF-CLEAN)
--
Used to select a
shorter 2 hour Self-
Clean cycle time.
SELF-CLEAN
PAD--
Used to select a longer
3 hour Self-Clean
cycle time.
•
Oven
•
Preheat
•
Door
Locked
elf-Cleaning
Oven
• . •
TIMER ON/OFF PAD--
START TIME
Used to set or cancel the
PAD--
Used to set
minute timer. The minute
the desired start
timer does not start or stop
time for baking &
cooking. Also,
Self-Clean.
May be
TIMER ON/OFF pad is used used with BAKE
to set the Continuous
Bake
TIME to program a
feature,
delayed
bake cycle.
FEATURE INDICATOR
LIGHTS--
These light to
show
wMch feature is in
._
BsF_01LPAD_
Used to
select the variable
broil
function.
OVEN, PREHEAT
& DOOR LOCKED LIGHTS* -- The "OVEN"
light
will glow each time the oven turns on to maintain
the set oven
temperature.
The "PREHEAT"
light will glow when the oven is first
set to operate, or if the desired temperature
is reset higher than the
actual oven temperature.
The "DOOR
LOCKED"
light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
OVEN LIGHT PAD--
Used to turn the interior
oven light ON or OFF.
CLEAR/OFF
PAD--
Used
to clear any function
previously
entered
except the time of day
and minute timer. Press
CLEAR/OFF
to stop
cooking. Also the CLEAR/
OFF pad is used to
activate oven lockout
setting.
*N0tei The OVEN indicator light on the electronic display Will turn ON and OFF When Using the Bake feature and during
preheat: This is n0rma! and indicates that the oven is cycling to maintain the selected baking temperatu[e. When the
preheat indicator light turns OFF, your oven is ready.
For a silent
control
panel
When choosing a function, a beep will be heard each time a pad is pressed, tf desired, the control can be programmed for
silent operation. Press and hold @.
After 7 seconds, the control will beep once. This will block the controls from sounding
when a pad is pressed. To return the sound, press and hold @
again for 7 seconds until the control beeps once.
Temperature
conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature
to °C (Celsius)
or from °C to °F (control
should not be in a Bake or Clean mode):
1.
Press _.
"----"
appears in the display.
2.
Press and hold the /_
until "HI" appears in the display.
3.
Press and hold _
until °F or °C appears in the display.
4.
Press the /_
or V
to change °F to °C or °C to °F.
5.
Press any control pad to return to normal operating mode.
Advertisement
