Frigidaire E23CS75DSSH Use & Care Manual page 13

Controls & Settings
Choosing FahrenheitorCentigrade
Depending on which temperature standard you
prefer to use, you can set your control panel to
display in fahrenheit or centigrade. To change
between fahrenheit and centigrade, press the
Mode button (located between the two digital
temperature displays).
MakingTemperature Adjustments
(_) FREEZER
Press to alternate between
Fahrenheit and Centigrade
After running your refrigerator for 24 hours, you can adjust temperatures as
needed. Make your adjustments small and gradual, allowing time for temperatures
to change and stabilize. Refer to the following guidelines for temperature settings.
Temperature Control Range
Freezer Fresh Food
Fahrenheit Centigrade Fahrenheit Centigrade
t Warmest 6 ° 8_
Warmer
I
Factory Setting Midpoint OQ -!8 ° 37 ° 3_
_IV COldeSt :6 33 i
Temperature Adjustment Guide
Fresh Fo0d compartment is too warm[
If
L
FreSh FoOd compartment is too cold [
if
L
If Freezer compartment isto0 Warm /
L
Freezer compartment is too C01e /
If
[
Adjust Fresh Food control one degree
colder by pressing Down Arrow button.
Adjust Fresh Food control one degree
warmer by pressing the Up Arrow button.
Adjust Freezer control one degree colder
by pressing Down Arrow button.
Adjust Freezer control one degree warmer
by pressing the Up Arrow button.
FRIDGE
WhatTo DoIf TheTemperature DisplaysFlash
If ever you you see both temperature displays continuously flashing, it may indicate
that the control system has detected a performance problem. Call your Electrotux
service representative, who can interpret the flashing message.