Download  Print this page

Cleaning The Exhaust Filters; Surface Light Replacement - Frigidaire FFMV162LMA Use & Care Manual

Hide thumbs


Table of Contents
the power cord before cleaning or
leave the door open to deactivate
the oven during cleaning.
Cleaning the exhaust filters
The oven ventilation exhaust filters should be removed and
cleaned often; generally at least once every month.
To av0id risk of personal injury or propertY damage, do
not operate oven hood without filters properly in place,
Surface lights
Surface light replacement
To avoid risk of Personal injury or property damage, wear
replacing the light bulbs.
Unplug the microwave oven or turn off power at the main
circuit breaker.
Remove the bulb cover mounting screws at both light
positions under the microwave.
Replace bulb with 30 watt appliance bulb.
1. To remove the exhaust ventilation filters, slide the filter to
the rear. Then pull filter downward and push to the other
side. The filter will drop out. Repeat for the 2nd filter.
4. Re-install bulb cover and mounting screw.
5. Plug the microwave back into the power supply or turn
the power back on at the main circuit breaker.
2. Soak the ventilation filters in hot water using a mild
detergent. Rinse well and shake to dry or wash in
a dishwasher. Do not use ammonia.
The aluminum
on the filter will corrode
and darken.
3. To reinstall the exhaust
ventilation filter, slide it into the
side slot, then push up and toward oven to lock.
Reinstall the 2nd filter using the same procedure.

Hide quick links:


Table of Contents

  Also See for Frigidaire FFMV162LMA