Heating With High/Low Power Levels; Heating With Multiple Cooking Stages; Heating With Lower Power Levels - Frigidaire FFMV162LMA Use & Care Manual

Heating with high power level
Example: to heat for 5 minutes at 100% power:
1 Press Cook Time pad. cook
• tffl/e
,
Use the number pads to enter
desired heating time (cook time may
be set up to 99 minutes and 99
seconds).
3. Touch STARTpad.
5 0 0
start
When heating has finished you will hear beeps and
"Good" will display.
Heating with lower power levels
Using the highest power level to heat foods with does not
always give the best results when some types of food need
slower cooking, such as roasts, baked goods or custards.
Your oven has nine other power levels you may choose.
Heating with multiple cooking stages
For best results, some microwave recipes call for different
power levels or different lengths of time for cooking• Your
microwave may be set to change from one stage to another
automatically (2 stages maximum)•
Example: to cook food for 3 minutes at 80% power and
then 50% power for 6 minutes 30 seconds:
1. Press Cook Time.
2. Use the number pads to enter
heating time for the 1st stage (cook
time may be set up to 99 minutes
and 99 seconds).
3. Press Power Level pad once•
,
Example: to heat for 4 minutes at 70% power: 5.
1. Press Cook Time. cool<
tree
,
Use the number pads to enter desired
heating time (cook time may be set
up to 99 minutes and 99 seconds).
4 0 0
3. Press Power Level pad once for
power level 10 (100% power)•
cool<
ti_l]e
power
level
4. Use the number key to change the
power level to 7. PL7 appears in the
display (70 % power).
3 0 0
power
evO
7
,
,
,
Use the number keys to enter power
level for the 1st stage. PL8 appears
in the display (80 % power).
Press Cook Time pad for 2nd
stage•
Use the number pads to enter
heating time for the 2nd stage (cook
time may be set up to 99 minutes
and 99 seconds).
Press Power Level pad for 2nd
stage•
Use the number key to enter power
level for the 2nd stage. PL5 appears
in the display (50 % power).
9. Press START pad.
8
cool<
time
6 3 0
power
evel
5
start
i i
When heating has finished you will hear beeps and
"Good" will display.
5. Press START pad.
start
When heating has finished you will hear beeps and
"Good" will display.
Note:
Power level must always be programmed for first
stage - 100% =10.