Frigidaire FES355ABB Control Manual
Electronic oven control
Hide thumbs
Also See for FES355ABB:
- Factory parts catalog (11 pages) ,
- Unpacking instructions sheet (2 pages)
Advertisement
Quick Links
ELECTRONIC OVEN CONTROL
Control
Pad Functions
Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the
various functions of the oven as described below. Note: The graphics on your timer may not look exactly like those
shown. This doesn't change the way it operates.
Note: The oven function
will not work if the time of day clock is not set.
Bake Pad- Used to
enter the normal_
baking mode
temperature.
Clear Pad- Used to clear any function previously
entered except the time of day and minute timer.
PushClear pad to stop cooking.
\
Broil Pad- Used to
select the variable
broil function.
Clean Pad- Used to
select the self-
cleaning cycle.
Up and Down arrow pads- Usedalong with the
Clock Pad- Used to
function pads to select oven temperature, cooking time,
set the time of day.
stop time (when programming an automatic stop ti_
time of day, clean time and minute timer.
/
Feature indicator
i
lights-These light
to show which
feature is in use.
® Oven
• Preheat
I
Door Locked
/
• o •/{Self-Cleaning
Oven
' ° '
/
t
I
Timer Pad- Used to set or
cancel the minute timer.
The minute timer does not
start or stop cooking.
Oven, Preheat & Lock lights- The "oven" light will glow each time the oven
unit turns on maintain the set oven temperature.
The "Preheat" light will glow
when the oven is first set to operate, or if the desired temperature
is reset
higher than the actual oven temperature.
The "Lock" light will flash until the
door locks when the self-clean cycle is in use. It glows constantly after the
door locks.
Bake Time Pad-
Used to enter the
length of the baking
time.
Stop Time Pad-
Used to set the
desired stop time
for baking. Can be
used with BAKE
TIME to program a
delayed bake cycle.
The oven can be programmed
to:
Bake normally, Time Bake, Broil, Self-Clean
Note: Push buttons or pads may be shaped differently.
For a silent control
panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed
for silent operation.
Push and hold STOPTIME pad. After 7 seconds, the control will beep once. This will block the controls
from sounding when a pad is pushed. To return the sound, push and hold STOP TIME pad again for 7 seconds until 1
beep is heard.
Note: The control will return to the audible mode after a power outage.
Temperature
Conversion
(Fahrenheit/Celsius)
The electronic
oven control
is set to operate
in °F (Fahrenheit)
when shipped
from the factory.
The oven can be
programmed
for any temperature
from 170°F to 550°F (65°C to 287°C).
To change the temperature
to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1.
Push BROIL pad. "---"
appears in the display.
2.
Push and hold the UP ARROW pad until "HI" appears in the display.
3.
Push and hold BROIL pad until °F or °C appears in the display.
4.
Push UP or DOWN ARROW pad to change °F to °C or °C to °F.
5.
Push any function
pad to return to normal operating
mode.
1
318200191 (0104) Rev.A
Advertisement
Related Manuals for Frigidaire FES355ABB
Summary of Contents for Frigidaire FES355ABB
- Page 1 ELECTRONIC OVEN CONTROL Control Pad Functions Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the various functions of the oven as described below. Note: The graphics on your timer may not look exactly like those shown.
- Page 2 Setting the Clock and Minute Timer © • • Q Oven Q Preheat • Door Locked • • • Self-Cleaning Oven • Note: The oven function will not work if the time of day clock is not set. To Set the Clock When the range is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash "12:00".
-
Page 3: Oven Controls
Setting Oven Controls © • • • Oven • Preheat • Door Locked • • • Self-Cleaning Oven • Note: The oven function will not work if the time of day clock is not set. To Set or Change the Temperature for Normal Baking The oven can be programmed... - Page 4 Setting Oven Controls (continued) • • Oven Q Preheat • Door Locked • • • Self-Cleaning Oven • To Broil Arrange oven rack while oven is still cool. Push the BROIL pad. Pushand hold the UP or DOWN ARROW pad until the desired broil setting level appears in the display. Push UP ARROW pad for HI broil or the DOWN ARROW pad for LO broil.
-
Page 5: Setting Oven Controls
Setting Oven Controls (continued) • Oven Q Preheat • Door Locked • • • Self-Cleaning Oven • • • To Set the Automatic Timer (Timed Bake Feature-If equipped) The BAKE TIME and STOP TIME controls operate the Timed Bake Feature. The automatic timer will turn the oven on and off at the times you select in advance. -
Page 6: Oven Cleaning
Oven Cleaning • • • Oven Q Preheat S Door Locked • • • Self-Cleaning Oven • Note (some range models only): During the self-cleaning, thesurface element, when used, are subjected to high heat. To ensure maximum element life, a safe guard locks off the use of the surface elements during the self-clean cycle. Once the oven cleaning cycle is completed and the oven door can be opened, the surface elements can be utilized. -
Page 7: Failure Modes
Recalibrating Your Oven Temperature Recalibrating Your Oven Performance The temperature in the oven has been set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven istoo hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is higher or lower than recommended temperature. - Page 8 Notes...