Table of Contents
Advertisement
Setting
the Clock and
Minute
Timer
Note:
The oven function
will not work
if the time of day clock is not set.
To Set the Clock
When the range is first plugged
in, or when the power
supply to the range has
been interrupted,
the display
will flash "12:00".
1.
Push _.
2.
Within
5 seconds,
push and hold the _
or _
until the correct
time
of day appears
in the display.
Note: The clock cannot be changed during any timed bake or self-clean
cycle.
To Set the
Minute
Timer
1.
Push @.
2.
Push the _]
to increase
the time
in one minute
increments.
Push and
hold the [/_
to increase
the time in 10 minute
increments.
The timer can
be set for any amount
of time from
1 minute
to 11 hours and 59 minutes.
Note:
If you push the _
first, the timer will advance
to 11 hours and 59
minutes.
3.
The display
shows
the timer
count
down
in minutes
until
one
minute
remains.
Then the display
will count
down
in seconds.
4.
When
the set time
has run out, the timer
will
beep 3 times.
It will then
continue
to beep 3 times
every 60 seconds
until
_
is pushed.
Note:
The minute
timer
does not start
or stop cooking.
It serves as an extra
timer
in the kitchen
that will beep when the set time
has run out. The minute
timer
can be used alone
or during
any of the other
oven functions.
When the
minute
timer
is in use with
any other
mode,
the minute
timer will be shown
in
the display.
To view other
functions,
push the function
pad for that
mode.
To Change
the Minute
Timer
while
it is in use:
While the timer is active and shows in the display,
push and hold the _
or
[_to
increase
or decrease
the time.
To Cancel the Minute
Timer before
the set time has run out:
Push _.
Advertisement
Table of Contents
