Table of Contents
Advertisement
Control
Pad Functions
READ
THE INSTRUCTIONS
CAREFULLY
BEFORE
USING
THE OVEN.
For
satisfactory
use of your oven, become
familiar
with
the various functions
of the
oven as described
below.
CLEAR PAD--
Used to clear
any function
previously
entered
except
the time
of
day and minute
timer.
Push
CLEAR to stop cooking.
BAKE PAD--Used to
enter the normal
baking mode
temperature.
UP and
DOWN
ARROW
PADS--
Used along
with
the
function
pads to select oven temperature,
cooking
time,
stop time
(when
programming
an automatic
stop time),
time of day, clean time
and minute
timer.
BROIL PAD--
Used to select
the variable
broil function.
CLEAN
Used to select the
self-cleaning
cycle.
OVEN, PREHEAT & LOCK LIGHTS-- The "OVEN"
light will glow each time the oven unit turns on to
maintain the set oven temperature.
The "PREHEAT"
light will glow when the oven is first set to operate,
or if the desired temperature
is reset higher than
the actual oven temperature.
The "LOCK" light will
flash until the door locks when the self-clean cycle
is in use. It glows constantly
after the door locks.
TIMER PAD--
Used to set or
cancel the minute
timer. The minute
timer does not
start or stop
cooking.
CLOCK
PAD--
Used
set the time of
day.
IRE
INDICATOR
LIGHTS--
These
light to show which
feature
is in use.
__
BAKE TIME PAD--
Used to enter the
length of the
baking time.
TIME PAD--
Used to set the
desired stop time
for baking. Can be
used with BAKE
TIME to program a
delayed bake cycle.
The oven
can
be programmed
to:
• Bake normally
• Time bake
• Broil
• Self-clean
For a silent
control
panel:
When choosing
a function,
a beep will be heard
each time
a pad is pushed.
If desired,
the controls
can be programmed
for silent operation.
Push and hold
_.
After
7 seconds,
the control
will beep once. This will block the controls
from
sounding
when
a pad is pushed.
To return
the sound,
push and hold
_
again
for 7 seconds
until
1 beep is heard.
Note:
The control
will return
to the audible
mode
after
a power
outage.
Temperature
conversion:
The electronic
oven control
is set to operate
in °F (Fahrenheit)
when shipped
from the factory.
The oven can be programmed
for any temperature
from
170°F to 550°F (65°C to 287°C).
To change
the temperature
to °C (Celsius) or from °C to °F (control
should
not be in a Bake or Clean mode):
1.
Push _.
"
" appears in the display.
2.
Push and hold the _
until "HI" appears in the display.
3.
Push and hold _
until °F or °C appears in the display.
4.
Push the _
or (_
to change °F to °C or °C to °F.
5.
Push any function
pad to return to normal operating
mode.
Advertisement
Table of Contents
