Craftsman NEXTEC 320.30562 Operator's Manual page 9

Cleaning
,_ WARNING: To reduce the risk of personal injury and damage, never
immerse your Power Source, battery pack or charger in liquid or allow a liquid to
flow inside them.
Clean dust and debris from charger and power ports. Keep the power ports
clean, dry and free of oil or grease. Use only mild soap and a damp cloth to
clean the power port, battery pack and charger, since certain cleaning agents
and solvents are harmful to plastics and other insulated parts. Some of these
include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning
solvents, ammonia and household detergents containing ammonia. Never use
flammable or combustible solvents around power port.
PROBLEM CAUSE SOLUTION
The FuelGauge The battery pack charge Charge the battery pack
following the instructions for your
is not ON is fully depleted charger and battery pack.
when a battery
pack has been Check the contacts of the Power
inserted Weak contacts Source; make sure they are clean
and not damaged
The Power
Source cannot
power an
appliance and
the FuelGauge
blinks in red
The appliance draws
more than the rated
output of the port
The output port is under
short circuit protection
The battery pack is
under high temperature
protection
Remove the appliance from the
port; remove and reinstall the
battery pack to restart the Power
Source. Make sure the working
current for the appliance is not
greater than the rated output of
the port.
Remove the battery pack, check
and make sure no metal or
debris is inside the ports.
Remove the appliance and
battery pack from the Power
source, cool the battery pack
until the temperature drops to
158°F (70°0)
30562 ManuaLRevised_11-0511 Page 9