Download Print this page
Craftsman 31013 Operator's Manual

Craftsman 31013 Operator's Manual

5-drawer bb tool center

Advertisement

Available languages

Available languages

Quick Links

OPERATOR'S MANUAL
T
5-DRAWER
BB TOOL CENTER
- MODEL
# 31013
_."Y-'_
=1 = lm'd
CALL 1-800-366-7278
FOR SERVICE PARTS. Refer to Service
Parts Drawing for full listing of Service Parts.
LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is
located on a label on top shelf behind the logo.
• The maximum weight for each drawer should be no more than
25 Ibs.
• Empty weight of the unit is: 70 Ibs
• The maximum product weight, including contents, should be no
more than 400 Ibs.
• For casters, use high quality bearing grease, (yearly).
• Lubricate the slides with grease or equivalent,(twice
yearly.)
• Lubricate lock with graphite, (yearly).
Ball bearing
Friction slides
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit's luster finish. Apply the wax as
to a car. The wax will also help protect the unit against scratches.
• Grease and oil can be removed with most standard cleaning
fluids. For safety, use a nonflammable cleaning fluid.
• If drawer liners are supplied, it is recommended
they are used
to protect the finish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned with soap and
water.
DANGER
,&
is used to indicate a hazardous situation which,
if not avoided, will result in serious injury or death.
WARNING
z_
indicates a hazardous situation which, if not
avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
CAUTION:
Read and follow all Safety Rules and Operating
Instructions before first use of this product.
DANGER
_k
• DO NOT stand on this product. You may fall, which may cause
personal injury.
• DO NOT step in drawers. You may fall, which may cause personal
injury.
• USE THE BRAKES when not moving this product. This will pre-
vent the product from rolling, which may cause personal injury or
product damage.
• APPROPRIATELY
SECURE this product before moving with a
forklift.
• DO NOT tow with power equipment. The product could tip, which
may cause personal injury or prduct damage.
WARNING
/k
• WEAR SAFETY GLASSES when removing or repositioning the
slides. The tool could slip, which may cause personal injury.
• DO NOT mount this product on a truck bed or any other moving
object. This may cause personal injury or product damage.
• DO NOT alter this product in any manner. For example, do not
weld external Iockbars or attach electrical equipment. This may
cause personal injury or product damage.
• UNIT MUST BE located on a level surface. The product may be-
come unstable and tip if stored or moved on an un-level surface,
which may cause personal injury or product damage.
• LOCK the drawers before moving this product. The drawers could
come open and make the product unstable and tip, which may
cause personal injury or product damage.
• DO NOT pull this product when moving it. Push the product to
prevent personal injury.
CAUTION
• BE CAREFUL when opening more than one drawer. The product
may become unstable and tip, which may cause personal injury or
product damage.
Sears Brands Management
Corporation,
Hoffman Estates, IL 60179
USA
F1842

Advertisement

loading

Summary of Contents for Craftsman 31013

  • Page 1 OPERATOR'S MANUAL Friction slides Ball bearing 5-DRAWER BB TOOL CENTER - MODEL # 31013 • Periodically the drawer fronts, drawer trim, and other surfaces should be cleaned with a mild detergent and water. • Auto wax will preserve the unit's luster finish. Apply the wax as to a car.
  • Page 2 I: r_,1 = !Jlvlv/_,1 TOOLS REQUIRED: REMOVE CHEST FROM ROLL-AWAY Flat-tip Screwdriver 3/8-in Wrench • The unit comes with the chest secured to the inside of the roll-away by either two or four 1/4-20 bolts. • Lay the roll-away down on its back. Use packaging material to protect the paint finish.
  • Page 3: Removing Drawers

    Lever S tyle - Liftorlower ( depending ontheslide) t he •Attach thechest using two1/4-20 s crews t hat w ere used release lever o nboth sides, (this allows t heslides t oride tosecure t hechest tothebottom oftheroll-away. over t hestops). Pull o uttoremove. •Wrench tighten a llscrews.
  • Page 4 REINSTALL DRAWERS REMOVING AND INSTALLING SLIDES FROM UNIT Ball bearing slide - Pull slides and slide carrier out to fully • First remove the drawer. (See section A) extended position (see illustration). Hold the slide on the To remove the slide: cabinet while aligning it with the slide on drawer.
  • Page 5 MANUAL DE USUARIO Correderas de friccion • Lubrique la cerradura con grafito (anualmente). CENTRO PAPA HERRAMIENTAS CON COJINETES • Limpie con detergente suave y agua los frontales y los bordes laterales BOLAS (BB, EN INGL#S) DE CINCO CAJONES de los cajones y las dem&s superficies. MODELO NO.
  • Page 6: Piezas Incluidas

    HERRAMIENTAS NECESARIAS: QUITAR EL BAUL DE LA PIEZA DESLIZANTE Destomillador, punta de cruz Llave Inglesa de 8mm • La unidad tiene un bael fijado por dentro a una pieza desli- zante ya sea por dos o cuatro pernos 1/4-20. • Acuesta la pieza deslizante boca arriba.
  • Page 7 Estilo palanca - Levante o baje (dependiendo de la corredera) • Fija el bael con los dos tornillos 1/4-20 usados para unir el bael al la palanca de liberaci6n en ambos lados (esto permite que las fondo de la pieza mencionada. correderas pasen sobre los topes).
  • Page 8 Estilo friccion - extienda completamente la gaveta. Inserte el destornillador en la ranura del costado y presione el tope hasta UITAR E INSTALAR LAS CORREDERAS DE LA UNIDA que libere el rej6n. Hale la gaveta justo despues del rej6n antes •...