Introduction; Welder Specifications; Duty Cycle - Craftsman ARC WELDER User Manual

This User's Guide manual provides
specific welder information for the 230
amp ac/140 amp dc arc welder. This
manual contains information such as the
specific assembly information, welder
duty cycle, welder open circuit voltage,
heat control adjustments, recommended
electrodes, etc. that are related to this
welder only. Table 1 lists the welder
specifications.
General welder information such as
safety information, general installation or
assembly instructions, preparation for
welding, general operation instructions
and welding techniques, etc are in the
WELDER'S INSTRUCTION MANUAL,
ARC WELDERS.
DO NOT ATTEMPT TO OPERATE
THIS WELDER until you have read and
understand both manuals. Make certain
you have removed all documentation
from the shipping carton.
Additional information on your welder is
available through the place of purchase
or from the manufacturer.
Read SAFETY SUMMARY in the
WELDER'S INSTRUCTION MANUAL,
ARC WELDERS before unpacking the
welder and before proceeding with any
procedures or making any attempts to
do any welding.
Table 1. Welder Specifications
230 amp ac/140 amp dc
DESCRIPTION:
Arc Welder
INPUT: 230 Vac, 48 amp, 60 Hz, 10
ac High Output: 60-230 amps
ac Low Output: minimum-180 amps
dc Straight/Reverse 20-140 amps
MAX O. C. VOLTS: 72
DUTY CYCLE: 20% @ max. rated amperage
MODEL: 110-114