Advertisement
Available languages
Available languages
Installation
The FWC100
Wine Cellar is designed
to be either free-standing
or built-in. It has a fan at
the bottom of the unit to direct compressor-generated
heat away from the compressor
and
through the front of the unit. There must
be a minimum
of 3" of space around both sides
and the back of the appliance
and the airflow from the vents at the front of the system must
be unimpeded.
Once the unit is positioned,
the leveling
leg should be turned to level the Wine Cellar.
Electrical Connection
ImportantE For your personal
safety, this appliance
must be properly
grounded.
In the event
of an electrical
short circuit, grounding
reduces the risk of shock by providing
an escape
wire for the electric current. This appliance
is equipped
with a cord having a grounding
wire
with a grounding
plug. The plug must be inserted into an outlet that is properly
grounded
and installed.
Consult
a qualified
electrician
if you do not completely
understand
the
grounding
instructions.
DO NOT UNDER ANY CIRCUMSTANCES
CUT OR REMOVE
THE THIRD (GROUND)
PRONG FROM THE POWER
CORD.
Use of Extension
Cords
Avoid the use of an extension
cord because
of potential safety hazards under certain condi-
tions. If it is necessary
to use an extension
cord, be sure to use only a 3-wire extension
cord that has a 3-blade
grounding
plug. Use a 3-slot outlet that will accept the plug. The
marked rating of the extension
cord must be equal or greater than the electrical
rating of
the appliance.
Advertisement
