Download Print this page

Craftsman 315.10670 Owner's Manual

Two-speed electric buffer-polisher double insulated
Hide thumbs

Advertisement

Quick Links

SEARS
OWNERS
MANUAL
MODEL NO.
315.10670
CAUTION.
Read Rules for
Safe Operation
and Instructions
Carefully
SAVE THIS
MANUAL
FOR
FUTURE
REFERENCE
612547-109
6-86
TWO-SP ED ELECTRIC
FFERoPOLISH
DOUBLE iNSULATED
Introduction
Operation
Maintenance
Repair Parts
Designed
exclusively
for and sold only by
SEARS, ROEBUCK
AND CO., Dept. 698/731A,
Sears Tower, Chicago,
IL 60684
PRINTED
IN U. S. A.

Advertisement

loading

  Related Manuals for Craftsman 315.10670

  Summary of Contents for Craftsman 315.10670

  • Page 1 SEARS OWNERS MANUAL MODEL NO. 315.10670 CAUTION. Read Rules for Safe Operation and Instructions Carefully TWO-SP ED ELECTRIC FFERoPOLISH DOUBLE iNSULATED Introduction SAVE THIS Operation Maintenance MANUAL Repair Parts FUTURE REFERENCE Designed exclusively for and sold only by SEARS, ROEBUCK AND CO., Dept.
  • Page 2 FULL ONE YEAR WARRANTY ON CRAFTSMAN BUFFER m POLISHER If this Craftsman Buffer-Polisher fails to give complete satisfaction within one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE THROUGHOUT THE UNITED STATES and Sears will repair it, free of charge.
  • Page 3 RULES FOR SAFE OPERATION (Continued) 11. USE SAFETY GLASSES with all tools. Also face or dust mask if cutting operation is dusty. 12. DON'T ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp...
  • Page 4: Operation

    OPERATION INSTALLING BONNETS 1. Unplug your Buffer-Polisher. Danger: Failure unplug your buffer-polisher may result in acciden- tal starting causing serious injury. 2. Place Buffer-Polisher as shown in Fig. 1. Stretch bonnet over polishing pad and continue around the pad as shown in Fig. 1. Warning: Make sure bonnet is evenly and securely...
  • Page 5 Rotatethe Buffer-Polisher a s shown in Fig. 4. Then cover the same area again moving the Buffer- Polisheras shown in Fig. 5. Repeatthis until you havecompletedapplyingwax to the entire surface. Whenapplyingwaxto areaswhereonly partialuseof the polishing bonnet is possible,someexcesswax will be thrown from the bonnet.SeeFig. 6. NEVER APPLY DOWNWARD PRESSURE ON YOUR BUFFER-POLISHER.
  • Page 6: Maintenance

    HELPFUL HINTS 1. When working in direct sunlight 3. Always wash your bonnets after each use. Clean necessary to vary the technique to keep the wax bonnets produce a better finish. from becoming too dry. Instead of applying to the entire surface, apply and remove...
  • Page 7: Parts List

    CRAFTSMAN BUFFER-POLiSHER m MODEL NUMBER 315.10670 The Model Number will be found on a plate attached to the Motor Housing. Always mention the Model Number in all correspondence regarding your BUFFER.POLISHER or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING...
  • Page 8 ® OWNERS TWO-SPEE MANUAL FFER°POL SH DOUBLE INSULATED SERVICE Now that you have purchased your Buffer-Polisher, should a need ever exist for repair parts or service, simply contact any Sears Service Center and most Sears, Roebuck and Co. Stores. Be sure to provide all pertinent facts when you call or visit.