Advertisement
Available languages
Available languages
How to Start:
1.
Turn the On/Auto/Off
lever
to "On/Auto"
and allow tank
pressure to build.
Motor will
stop when tank pressure reaches
"cut-out"
pressure,
2.
Pull the regulator knob out
and turn clockwise to increase
pressure. When the desired
pressure is reached push knob in
to Iock in place. The compressor
is ready for use.
NOTE: Always operate the air
compressor
in wetI-ventilated
areas
free of gasoline or other combustible
vapors, if the compressor
is being
used to operate a sprayer DO NOT
place near the spray area.
A13640
14-ENG
Advertisement
