Craftsman 310.26825 Owner's Manual page 3

WARNING:Read and
understand all instructions.
Failure to follow all instructions
listed below, may result in electric
shock, fire and/or serious personal
injury.
SAVE THESE INSTRUCTIONS
Work Area
• Keep your work area clean and
well lit. Cluttered benches and
dark areas invite accidents.
• Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
liquids, gases, or dust. Power
tools create sparks which may
ignite the dust or fumes.
• Keep bystanders, children, and
visitors away while operating a
power tool. Distractions can
cause you to lose control.
Electrical Safety
• Do not abuse the cord. Never
use the cord to carry the
charger. Keep cord away from
heat, oil, sharp edges, or
moving parts. Replace damaged
cords immediately. Damaged
cords may create a fire.
• A battery operated tool with
integral batteries or a separate
battery pack must be recharged
only with the specified charger
for the battery. A charger that
may be suitable for one type of
battery may create a risk of fire
when used with another battery.
Use listed battery only with
charger listed.
• Use battery operated tool only
with specifically designated
battery pack. Use of any other
batteries may create a risk of
fire. Use only with battery pack.
Personal Safety
• Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use tool while tired or under
the influence of drugs, alcohol,
or medication. A moment of
inattention while operating power
tools may result in serious
personal injury.
• Dress properly. Do not wear
loose clothing or jewelry.
Contain long hair. Keep your
hair, clothing, and gloves away
from moving parts. Loose
clothes, jewelry, or long hair can be
caught in moving parts.
• Avoid accidental starting. Be
sure switch is in the locked or
off position before inserting
battery pack. Carrying tools with
your finger on the switch or
inserting the battery pack into a
tool with the switch on, invites
accidents.
• Remove adjusting keys or
wrenches before turning the tool
on. A wrench or a key that is left
attached to a rotating part of the
tool may result in personal injury.
• Do not overreach. Keep proper
footing and balance at all times.
Proper footing and balance enable
better control of the tool in
unexpected situations.
• Use safety equipment. Always
wear eye protection. Dust mask,
non-skid safety shoes, hard hat, or
hearing protection must be used
for appropriate conditions.