Craftsman 580.753011 Owner's Manual page 5

KNOW YOUR PRESSURE WASHER
Read this owner's manual and safety rules before operating your cleaning system,
Compare the illustrations with },our cleaning system to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Accessory Tray
Spray Tips
Engine Switch
Choke Rod
Recoil Starter
(on front of engine)
Filter
Chemical Reservoirs
FueJTank
Nozzle Extension
with Quick Connect
Spray Gun
Pump equipped with
Automatic Cool Down System
Oil FiiJ Cap
Water inlet
High Pressure Hose
Accessory Tray -- Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
Air Filter -- Protects engine by filtering dust and
debris out of intake air.
Automatic Cool Down System -- Cycles water
through pump when water reaches 125°=155°F. Warm
water wiJJdischarge from pump onto ground. This
system prevents internal pump damage.
Chemical Reservoirs = Used to provide detergent or
other chemicals to the low pressure water stream.
Choke Rod -- Prepares a cold engine for starting.
Data Tag (not shown) -- Provides model, revision
and sedaJ number of pressure washer. Please have
these readily available if calling for assistance.
Engine Switch--Sets engine in starting mode for
recoil starter and stops a running engine.
Fuel Tank -- Fill tank with regular unleaded fuel.
Always leave room for fuel expansion.
High Pressure Outlet
High Pressure Hose -- Connect one end to the
water pump and the other end to the spray gun.
High Pressure Outlet -- To connect high pressure
hose.
Nozzle Extension with Quick Connect -- Allows you
to switch between four different spray tips.
Oil Fitl Cap -- Fill engine with oil here.
Pump- Develops high pressure.
Recoit Starter -- Use for starting the engine
manually.
Safety Goggles (not shown) -- Always use the
enclosed goggles or other eye protection when
running your pressure washer.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Includes trigger
lock.
Spray Tips -- Chemical injection, 0% 15 °, and 40°: for
various high pressure cleaning applications.
Water inlet -- Connect garden hose here.