Download Print this page

Craftsman Accessory Operator's Manual

Advertisement

Available languages

Available languages

Quick Links

OPERATOR'S
MANUAL
T
®
CALL 1-800=366-7278 FOR SERVICE PARTS. Refer to Service
Parts Drawing for full listing of Service Parts.
LOCATING
MODEL # INFORMATION
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
• The maximum weight for each drawer should be no more than
50 tbs.
• Empty weight of chest is 47 lbs.
• Empty weight of cabinet is 103 lbs.
• The maximum product weight for both models, including con-
tents, should be no more than 600 lbs.
• For casters, use high quality bearing grease, (yearly).
• Lubricate the slides with grease or equivalent,(twice
yearly.)
\
• Lubricate lock with graphite, (yearly).
Distributed by Sears Brands Management Corporation, Hoffman Estates, IL 60179
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax wilt preserve the unit's luster finish. Apply the wax
as to a car. The wax will also help protect the unit against
scratches.
• Grease and oil can be removed with most standard
cleaning fluids. For safety, use a nonflammable cleaning fluid.
• If drawer liners are supplied, it is recommended
they are used
to protect the finish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned
with soap and water.
DANGER
,_
is used to indicate a hazardous situation which,
if not avoided, wit___j
result in serious injury or death.
WARNING
z_
indicates a hazardous situation which,
if not avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation which, if not
avoided, m_m_Ay_
result in minor injury, moderate injury, or property
damage.
CAUTION:
Read and follow all Safety Rules and Operating
Instructions before first use of this product.
DANGER
• DO NOT siand on this product. You may fall or cause product
to tip.
• DO NOT open more than one drawer. The product may be-
come unstable and tip.
• DO NOT step in the drawers. You may fall or cause product to
tip.
• DO NOT mount this product on a truck bed or any other
moving object.
• DO NOT move the product prior to closing and locking all the
drawers and chest lid. The drawers could come open and
make the product unstable and tip.
• DO NOT place any objects on top of chest lid. Remove all
objects from chest lid before opening.
WARNING
z_
• WEAR SAFETY GLASSES when removing or repositioning
the slides.
• DO NOT pull the unit, push it when moving
• USE THE BRAKES when not moving this product. This wilt
prevent the product from rolling.
• DO NOT alter this product in any manner. For example, do not
weld external tockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• BE CAREFUL when closing the cover. Remove hands before
the cover closes completely.
CAUTION
• This product is not designed to be directly lifted with a fork lift,
or to be towed with any mechanical devices.
• The maximum weight for each drawer should never be
exceeded.
• Only transport this product empty. Properly secure when
transporting.
• DO NOT exceed maximum product weight, including contents.
See Capacities for more information.
F1904

Advertisement

loading

Summary of Contents for Craftsman Accessory

  • Page 1 OPERATOR'S MANUAL ® • Periodically the drawer fronts, drawer trim, and other surfaces should be cleaned with a mild detergent and water. • Auto wax wilt preserve the unit's luster finish. Apply the wax as to a car. The wax will also help protect the unit against scratches.
  • Page 2: Tools Required

    NOTE: Not a llassembly instructions will r elate toyour m odel. TOOLS REQUIRED: 3/8-in W rench SIDE HANDLE ATTACHMENT 1/2-in W rench Items Needed: Cross-tip Screwdriver #14 - 10 x 3/4 Cross-tip Screw (Qty: 4) Cross-tip Screwdriver Process: • Attach the side handle using (4) #14 - 10 x 3/4 Cross-tip HARDWARE INCLUDED: screws.
  • Page 3 GAS SPRINGS iNSTALLATiON LABELS (iF APPLICABLE) Items Needed: Process: Gas Springs (Qty: 2) • Apply a light film of glass cleaner to the surface where 5/16 - 18 Ball Studs (Qty: 4) the label is to be applied. 5/16 - 18 Clip-on Nut (Qty: 4) •...
  • Page 4: Removing And Installing

    ,© INSTALLING DRAWERS Ball bearing slide - Pull slides and slide carrier out to fully extended position (see illustration,) Hold the slide on the cabinet while aligning it with the slide on drawer, Slightly insert one side and repeat for the other side, Slowly push drawer to its fully closed position to engage slide, Open drawer and rectose to ensure proper operation, slide carrier...
  • Page 5 MANUAL DE USUARIO CRRFTSMRH° • Lubrique la cerradura grafito (anualmente). • Limpie con detergente suave y agua los frontales y los bordes laterales de los cajones y las demas superficies. • La cera para autom6viles preservara el acabado brilloso de la unidad. Aplique la cera como Io haria...
  • Page 6 NOTA: No todas las instrucciones de ensamblaje se HERRAMIENTAS NECESARIAS: refieren a tu modelo. Llave Ingtesa de 3/8 inch Llave Inglesa de 1/2 inch NSTALAClON DE LA MANIJA LATERAL Destomitlador de Punta en Cruz Elementos necesarios: Tornitlos Phillips de No. 14 - 10 x 3/4 (Cant.: 4) Destomitlador de Punta en Cruz PIEZAS INCLUIDAS:...
  • Page 7 INSTALACION DE PRIMAVERAS DE GAS ETIQUETAS (Sl APLICA) Elementos necesarios: Proceso: Amortiguador neum&ticoes (Cant: 2) • Aplica una capa fina de timpiador para vidrios en la Pemo Esf@ico de 5/16 - 18 (Cant: 4) superficie donde se colocar& la etiqueta. Tuerca de Abrazadera de 5/16 - 18 (Cant: 4) •...
  • Page 8 INSTALAClON GAVETAS Correderas de rodamJentos esfericos - hale hacia afuera las correderas y el soporte de las correderas hasta que queden en posici6n totalmente extendida (ver itus- traci6n). Sostenga la corredera en et gabinete mientras 1o alinea con la corredera de la gaveta. Soporte de las correderas Corredera...