Typical Installation - NuTone VENT-A-LITE 668RP Architectural & Engineering Specifications

CERTIFIED TEST DATA
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by the
Home Ventilating Institute, for off-the-shelf products, as
they are available to consumers. Product performance is
rated at 0.1 in. static pressure, based on tests conducted in
AMCA's state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based on
laboratory measurements. This NuTone model is listed by
Underwriters' Laboratories Inc.
The air delivery of a ventilating system may be
determined by:
1. Determine the equivalent duct length for each 90 degree
elbow by adding one foot of duct length for each inch of
duct diameter, i.e., a 4 inch diameter duct elbow equals
4 feet equivalent duct length and an 8 inch diameter
duct elbow equals 8 feet equivalent duct length.
2. Add the total straight length of duct and the equivalent
length for each elbow to obtain the total equivalent
duct length.
3. Locate the intersection of the fan performance curve and
the total equivalent duct length curves and draw a
vertical line down to the CFM scale and read the system
air performance.
1
(NOTE: 3 ⁄ " x 10" duct equals 6 inch diameter duct.)
4
AIR PERFORMANCE CURVE
(4 In. Duct to 10 Foot Lengths)
0.50
0.40
0.30
0.20
0.10
0.00
0 25 50
CFM CUBIC FEET PER MINUTE
STATIC PRESSURE
INCHES OF WATER 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45
CFM 77 75
75 100 125
72 70 67 64 60 54

TYPICAL INSTALLATION

LIGHT
SOCKET
50 Feet
40 Feet
30 Feet
20 Feet
10 Feet
47
NuTone, Inc., 4820 Red Bank Road, Cincinnati, Ohio 45227
REFLECTOR
MOUNTING
SCREW
Product specifications subject to change without notice.
Printed in U.S.A.