Electrolux E23CS75DSS1 Use & Care Manual page 9

Connecting The Water SuppJy
ABOUTYOUR WATIIE, IIIR S UIIIDIIII:::>LY
[] [] [] m [] [] [] [] m [] [] m m m [] [] [] m m [] []
The automatic ice & water dispenser on your refrigerator requires a permanent
water supply to function correctly. During installation, you (or a service
professional) establish this water supply by connecting a copper tube from your
household water system to a valve at the rear of the refrigerator.
You may have already followed the directions in the Installation Instructions to
connect the water supply. This information is repeated here for future reference if
you need to relocate your refrigerator.
What you will need:
• Access to a cold water line with pressure of 20z100 psi.
• Copper tubing with %dnch (6.4mm) OD. Length for this tubing is the distance
from the rear of the refrigerator to your household water supply line plus 7
feet (2.1 meters).
• A shut_off valve for the connection between your household water line and
the refrigerator supply line.
Do not use a self-piercing shut-off valve.
• A compression nut and ferrule (sleeve) for the water supply connection at the
rear of your refrigerator.
241540100_eb_sxs_Use&Care_En.pmd 9 1/22/2004, 10:33 AM