Electrolux E23CS75DSS1 Use & Care Manual page 13

ControJs & Settings
Choosing Fahrenheitor Centigrade
Depending on which temperature standard you
prefer to use, you can set your control panel to
display in fahrenheit or centigrade. To change
between fahrenheit and centigrade, press the
Mode button (located between the two digital
temperature displays).
Press to alternate between
Fahrenheit and Centigrade
Making Temperature Adjustments
After running your refrigerator for 24 hours, you can adjust temperatures as
needed. Make your adjustments small and gradual, allowing time for temperatures
to change and stabilize. Refer to the following guidelines for temperature settings.
TemperatureControl Range
Freezer Fresh Food
Fahrenheit
Wa|errm Warmest 6 °
I
Factory Setting Midpoint O°
I
Co_er Coldest -6 °
Centigrade Fahrenheit Centigrade
-t4Q 47÷
-21Q 33Q
8_
Temperature Adjustment Guide
If Fresh Food C0mpartraent is too warm
if Fresh Food Compartment is too C0Id
If Freezer ComPartment is too warm
If Freezer comPartment is too Cold
Adjust Fresh Food control one degree
colder by pressing Down Arrow button.
Adjust Fresh Food control one degree
warmer by pressing the Up Arrow button.
Adjust Freezer control one degree colder
by pressing Down Arrow button.
Adjust Freezer control one degree warmer
by pressing the Up Arrow button.
What To Do If The TemperatureDisplays Flash
if ever you you see both temperature displays continuously flashing, it may indicate
that the control system has detected a performance problem. Call your Electrolux
service representative, who can interpret the flashing message.
241540100_eb_sxs_Use&Care_En.pmd 13 1/22/2004, 10:33 AM