Electrolux EW30EW55GW6 Use & Care Manual page 18

Cooking odes
CON CTiON CON RT
Ill Ill [] III II III [] [] 111 III II [] II Ill II [] [] III II II II II
The Convection Convert pad is used to automatically convert a standard baking recipe for
convection baking. When set properly, this feature is designed to display the actual converted
(reduced) temperature in the display'. Convection Convert may ONLY be used with a Convection
Bake cooking mode. It can be used with the features End Time and Cook Time (see their sections
for directions). If convection conversion is used with the cook time and end time features, "CF"
(check food) will be displayed when 75% of the bake time complete. At this time the oven control
will sound 3 long beeps at regular intervals until baking had finished. VVhen the bake time has
completely finished the control will beep at regular interval until the CANCEL @ pad is pressed.
NOTE: To use this featu re with the COOK TIME _ option, the COOK TIME _G_pad must be pressed
before the CONVECTION CONVERT >_ pad.
Changing from a normal bake temperature to a convection bake temperature:
1. Press OVEN _, OVEN to light up the available cooking modes pads.
2. Press CONVECTION BAKE _.
3. Press COOK OPTIONS Cj_. The cook options items will light up.
4. Press CONVECTION CONVERT >_:_. The temperature displayed will be 25°F Iowerthan
what it used to be.
5. Press START _ to begin the convection baking (see Convection Baking section for
more informations).
P(D PREHEAT
II 11 [] [] II Ill [] [] II [] m II [] [] [] [] HI [] [] III ml 111
The Preheat feature will bring the oven up to temperature faster than a regular preheat and
then indicate when to place the food in the oven. Preheating is not necessary when roasting
or cooking casseroles. The oven can be programmed to preheat at any temperature between
170C'F to 550°F with some of the cooking modes; Bake, Convection Bake and Convection
Roast
IMPORTANT: The rapid preheat feature is for single rack ONLY. The heat distribution with
multiple rack will be uneven.
To set a rapid preheat (example is for a 350°F Bake):
1. Press OVEN _ OVEN to light up the available cooking modes pads.
2. Press BAKE _.
3. Press COOK OPTIONS
@. The cook options items will light
up,
4, Press RAPID PREHEAT _1_,
5. Press START _ to begin the baking with the rapid preheat feature enabled.
6. Place food in the oven when the chime signals and PRE-HEATING message disappears
indicating that the oven has reached the set target temperature.