Table of Contents
Advertisement
Setting
for Best Results
Upper oven racks
Luxury-Glide
TM
extendable
oven rack
upper rack
portion
Removing
and replacing
the offset rack
• To remove pull the oven rack straight forward
until it reaches the stop position. Lift up front of
oven rack slightly and slide out (not shown).
• To replace, fit the oven rack onto the rack
guides on the oven walls. Tilt the front of the
rack upward slightly and slide the oven rack
completely back into place (not shown).
Removing
and replacing
the
Luxury-Glide
TM
oven racks
To remove using one hand, reach through handle
opening on top of glide rack and lift up on the
release lever located across the lower front of the
rack as shown -Fig. 1-.
While holding up on the release lever, pull the glide
rack out of the oven until you reach the oven rack
stop position -Fig. 2-. Using both hands, grasp the
upper and lower portions of the glide rack. Lift up
the front of the rack slightly and continue to pull the
rack away from the oven -Fig. 3-. Be sure to grasp
both upper and lower rack portions together when
removing or handling the glide rack - the rack
portions move independently and are difficult to
handle unless held together.
To replace - grasp both upper and lower
portions
of glide rack, lift and place the rack
resting evenly between the oven cavity walls. Tilt
the front of the rack upward slightly and slide the
rack completely
into position. Some force may be
necessary to make sure the oven rack has
snapped completely back into place.
release
lever
lower rack
portion
Fig. 1
Fig. 2
Fig. 3
Hide quick links:
Advertisement
Table of Contents
