Improper Operation - Craftsman 919.165282 Owner's Manual

-_] _ _et I = [e_,3111 [o] _ I[e_-"F,__-'tl
Model No. 919-165282
Max. Developed BP 2
Bore 2.875"
Stroke 1.25"
Voltage-Single Phase 120V
Minimum Branch Circuit Requirement 15 amps
Fuse Type Time Delay
Air Tank Capacity 6
Approx. Cut-In 110
Approx. Cut-out 135
SCFM @ 40 psig 3.7
SCFM @ 90 psig 2.6
[-.%1 = _ I_'d[€-lJ] Im]=1 IqI_I ::_'_.,I m] : :1 = I_1i II[e _]_._
This manual contains information that iS important for you to know and understand. This information
relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you
recognize this information_ we use the symbols below. Please read the manual and pay attention to
these sections.
_ Indicates an
imminently hazardous
situation which, if not avoided, will
result in death or serious injury.
_'_'_'_lndicates a potentially
hazardous situation
which, if not avoided, could result in
death or serious injury.
_Tlndicates a potentially
hazardous situation
which, if not avoided, _ result in
minor or moderate injuw.
_Used without the
safety alert symbol
indicates a potentially hazardous
situation which, if not avoided, may
result in property damaoe.
IhSl_o]-'tL,1+hd b"Y.'_l_*'4 _[IP,[-._l_o].l[o _]P,[-.+
SAVE THESE INSTRUCTIONS
IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN
SERIOUS INJURY AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL
WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT.
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known (to the State of California) to
cause cancer, birth defects or other reproductive harm. Some example of these chemicals are:
lead from leed-based paints
crystalline silica from bricks and cement and other masonry products
arsenic and chromium from chemically*treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, a_ways wear MSHA/NIOSH approved, properly fitting face mask or respirator when using
such tools.
When using air tools, basic safety precautions should always be followed to reduce the risk of of
personat injury.
3* ENG D27447