Advertisement
INSERT CABLE CLIP
• Insert plastic cable clip into hole on the
back of handle column. Push cables
into clip.
Handle Column
Cables
Cable Clip
CONNECT
SHIFT ROD
• Insert end of shift rod farthest
from bend
into hole of shift lever indicator.
• Insert hairpin clip through hole of shift
rod to secure with bend of clip on right
side.
Shift Lever
Hairpin
Indicator
Shift Rod
REMOVE TILLER FROM CRATE
• Make sure shift lever indicator is in =N"
(neutral) position.
• Tilt tiller forward by lifting handle.
• Rotate tiller handle to the right and pull
tiller out of carton.
CHECK TIRE PRESSURE
The tires on your unit were overinflated at
the factory for shipping purposes. Correct
and equal tire pressure is important for
best tilling performance.
• Reduce tire pressure to 20 PSI.
HANDLE HEIGHT
• Handle height may be adjusted to bet-
ter suit operator. (See "1"0 ADJUST
HANDLE HEIGHT" in the Service and
Adjustments section of this manual).
7
Advertisement
