33....to reach the maximum recess. Slot through the flex foil.
35. Insert 2 new screws.
37. Tighten both screws in the order shown.
39. Insert the next 2 screws.
Page
22
(25)
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
34. Place the SLIDE MODULE ASSEMBLY into the A-COVER, hold
down the top side.
36. Set the correct torque.
38. Close the slider.
40. Check the torque of the tool.
6500 Slide RM-240
Service Manual Level &2
ISSUE