49. Bring the BOTTOM KEYMAT SUPPORT into position as shown.
Close the flex foil connector.
51. Now bring the latches of the BOTTOM KEYMAT SUPPORT
under the metal latches of the SLIDE MODULE.
53. Close the assembly. Click all snaps into their places.
55. Set the correct torque.
Page
24
(25)
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
50. Check the correct positioning of the connector.
52. Push down the BOTTOM KEYMAT SUPPORT evenly.
54. Insert the 4 new screws.
56. Tighten all screws with the correct torque in the order
shown.
6500 Slide RM-240
Service Manual Level &2
ISSUE