Advertisement
HOW TO SET UP YOUR
UNIT
Location
of the
Air Compressor
Locate the air compressor
in a clean,
dry and well ventilated
area. The air
compressor
should be located at
least 12" away from the wall or other
obstructions
that will interfere
with
the flow of air. The air compressor
pump
and shroud
are designed
to
allow for proper
cooling.
The
ventilation
openings
on the
compressor
are necessary
to
maintain
proper
operating
temperature,
Do not place rags or
other
containers
on or near these
openings,The
air filter must be kept
clear of obstructions
which could
reduce
air flow to the air compressor.
GROUNDING
INSTRUCTIONS
RISK OF
ELECTRICAL
SHOCK.
In the event of a short
circuit,
grounding
reduces
the risk
of shock
by providing
an escape
wire for the electric
current,
This
air compressor
must be properly
grounded.
The portable
air compressor
is
equipped
with a cord having a
grounding
wire with an appr0pdate
grounding
plug (see following
illustrations).
The plug must be used
with an outlet that has been installed
and grounded
in accordance
with all
local codes and ordinances.
1.
The cord set and plug with this
unit contains a grounding pin.
This plug MUST
be used with a
grounded
outlet.
IMPORTANT:
The outlet being used
must be installed and grounded
in
accordance
with all local codes and
ordinances.
2.
.
4,
Make sure the outlet being used
has the same configuration
as
the grounded
plug. DO NOT
USE AN ADAPTER.
See
illustration.
Grounded
_Outlets
Inspect
the p,lug and cord before
each use.
Do not use if there are
signs of damage.
If these grounding
instructions
are not completely
understood,
or if in doubt as to whether
the
compressor
is propedy
grounded,
have the installation
checked
by a qualified
electrician,
_
IMPROPER
GROUNDING
CAN
RESULT
IN ELECTRICAL
SHOCK.
Do not modify
the plug provided.
If
it does not fit the available
outlet,
a
correct
outlet
should
be installed
by a qualified
electrician.
Repairs
to the cord set or plug
MUST
be made
by a qualified
electrician,
11 - t=NG
D24580
Advertisement
