Download Print this page

Craftsman 486.24629 Owner's Manual page 13

42-inch universal tow behind roug cut mower

Advertisement

The operation of any mower can result in foreign objects being thrown into the eyes,
which can result in severe eye damage.
Always wear safety glasses or eye shields
before starting your mower and while mowing+ We recommend wide vision safety mask
for over the spectacles or standard safety glasses.
CHILDREN
Tragic accidents
can occur if the operator
is not alert to the presence
of children.
Children
are often attracted
to the machine
and the mowing
activity.
Never
assume
that children
will remain
where
you last saw them.
HOW TO USE YOUR MOWER
STOPPING
MOWER BLADES-
=
Move mower blade dutch switch to "DISENGAGED"
position.
ENGINE-
+
Move throttle control to "SLOW" position.
NOTE:
Failure to move throttle control to "SLOW"
position or allowing engine to idle before stopping may
cause engine to "backfire".
+
Turn ignition key to "OFF" position and remove key.
AIv_ays remove key when leaving tractor to prevent
unauthorized use.
o
Never use choke to stop engine.
TO USE CHOKE
CONTROL
Use choke control whenever you are starting a cold
engine.
Do not use to start a warm engine.
To engage choke control, move throttle control to
choke position.
,
After engine has started move throttle control to fult
+
throttle position.
TO USE THROTTLE
CONTROL
Always operate engine at full throttle.
*
Operating engine at less than full throttle reduces
the battery charging rate.
+
Full throttle offers the best mower performance.
TRANSPORTING
+
Shut off engine.
+
Place mower deck in the highest position directly
behind tractor.
ATTACHING
MOWER
TO TRACTOR
+
Place mower behind tractor and back tractor up to it
for attaching. (See Fig. 5)
+
Slide tow bar of mower over tractor draw bar so that
the hitch pin holes line up.
Insert hitch pin until it extends through the bottom of
the tow bar.
Insert hair cotter pin through hitch pin.
TRACTOF_
HITCH PIN
OR MOWER
CLEVIS PIN
TRACTOR
DRAWBAR
HAiR COTTER PIN
FIG. 5
13

Advertisement

loading