Part Names And Functions - Denon DVD-2200 Operating Instructions Manual

PART NAMES AND FUNCTIONS
See page 3.
O Power button
* Press once to turn the power on.
* Press again to set to the "OFF" position and turn the power
off.
* Set the power to the standby mode by pressing the POWER
OFF button on the remote control uh}t while the power is on,
* -[t_rn the power on fron_ the standby mode by pressing the
POWER ON button on the remote control unit,
Powo_" indicator
Q This indicator lights when the power is on and wher_ the
power is it/the standby mode,
Disc trav
* Load discs here, (See page 20,)
, Press the OPEN/CLOSE button _ to open and close t/re
disc tray.
The disc tray is also closed when the PLAY bLit_on _ is
pressed.
PLAY button
* Press this button to p}ay the disc. (See page 38.)
SEARCH MODE button
o Press this to change the search mode t_ search for groups
or titles, tracks or chaptem when selecting sections of discs
directly using the number buttons or SKiP buttons,
ST_LLtPAUSE button (J|)
, Press this button to pa_se images or music or to play
images frame by frame, (See pages 40, 41 ,)
STOP huron _m}
Press this to stop the dk_c, (See page 40,)
Skip button _I_,_)
Press this to move back to the beginning of the current track
(or chapter).
Press egain to move back to the beginning of the previous
track (or chapter). (See page 41 .}
Skip button (_|)
* Press this to move ahead to the begh_nh-/g of the next track
(or chapter}. (See page 41 .}
@
Slow/Search button (44}
Press this to set the slow pby mode and to search in the
reverse direclioh, (See pages 40, 41 ,/
@ S_ow/Sea_'ch button (i_1_)
o Press this to sel the slow play mode and to seerch in the
forward direction, (See pages 40, 41
@ PROGRESSIVE button
* Press te switch the progressive video output mode
between progressive and interlace.
/See psge 2S.}
This function does not work when a Cb is playing.
_} PURE D_RECT
VIDEO
bu_on
,, Pre_s to switch the video output between on and off.
,_ When the power is turned off, the setting is restored to
the default yak]e, /The default value is ON.}
@ SRS TS button
Sets the virtual surround sound.
(Functions when pla_/ing bVD-video_ or VCDs onIV. See
page 42 .)
PURE DIRECT DIGITAL button
Press to switch tile audio output between or_ and off,
o When the power is ttimed off, the setting is restored to
the defa_JIt value, (The default value is ON.}
@ PURE DIRECT D_SPLAY
button
Press to switch the indicate in Disp}ay of the main unit
between on and off.
W}_en the power is turned off, the setting is restored to
I:he default value, (The defat_lt value is ON.)
Even when the display is turned off, it lights for about 2
seconds when any button other than the DIMMER button
is pressed.
Setting the playback a_'eaJlaye_ of S_per audio CD
(SUPER AUDIO CO SETUP}
, Switch tile area/Jayer of the Super
audio CDs
played whh
priority,
OPE_/CLOSE button (_)
,' Press this bdtton to open arid close the disc tray.
(See page 20.)
@ Display
,, {nforn'_ation on the disc that is currently p}aying is shown on
the display. {See page 17,}
Remote eontroJ set, sot
16