Lenovo ThinkPad T430s User Manual page 138

Table 5. Config menu items (continued)
Menu item
Serial ATA (SATA)
CPU
Intel AMT
120
User Guide
Submenu item
SATA Controller Mode
Option
Core Multi-Processing
Intel Hyper-Threading
Technology
Intel AMT Control
CIRA Timeout
Console Type
Value
• Compatibility
• AHCI
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Permanently Disabled
0-255
Note: The default value is
60 seconds.
• PC-ANSI
• VT100+
• VT-UTF8
• VT100
Comments
Select SATA controller
operation mode.
Enable or disable additional
execution core units within
a CPU.
Note: If you are using a
computer with a single-core
processor, this item is not
available.
Enable or disable additional
logical processors within a
processor core.
If you select Enabled, Intel
AMT (Active Management
Technology) is configured
and additional setup items
are provided in MEBx
(Management Engine BIOS
Extension) Setup.
If you select Permanently
Disabled, you will never be
able to enable it again. Be
cautious when you want to
use this option.
Note: You can enter
the MEBx Setup menu
by pressing Ctrl+P key
combination in the Startup
Interrupt Menu window. To
display the Startup Interrupt
Menu, press the Enter key
during the POST.
Set the timeout option for
CIRA connection to be
established. 1 though 254
seconds are selectable.
If you select 0, use 60
seconds as the default
timeout value.
If you select 255, the
waiting time for establishing
a connection is unlimited.
Select the console type for
AMT.
Note: This console type
should match the Intel AMT
remote console.