2. Close the computer display, and turn the computer over.
3. Remove the battery. See "Replacing the battery" on page 67.
4. Loosen the screws
5. If a tool for removing connectors is included in the package with the new card, use it to disconnect the
cables from the card. If no such tool is included, disconnect the cables by picking up the connectors
with your fingers and gently unplugging them.
Note: Depending on the system configuration of your computer, the card might have only one connector.
6. Remove the screw
86
User Guide
1
, then remove the cover
1
. The card pops up
2
2
.
.