Power Connection - Oki ES2024 User Manual

POWER CONNECTION

Ensure both the printer power switch and the AC supply
are switched OFF before connecting the power cable.
1. Connect the power cable (1) into the power socket on the
printer, then into a grounded power supply outlet.
1
2. Switch the printer ON using the main power switch (2).
The printer will go through its initialization and warm up sequence.
When the printer is ready, the READY indicator comes on and stays
on (green) and the LCD indicates ONLINE.
After installing the new toner cartridges, the message
TONER LOW or CHANGE TONER may appear on the display.
If this message does not disappear after a few pages have
been printed, reinstall the appropriate toner cartridge.
WARNING!
2
NOTE
ES 2024/2024e Setting up • 33