1060 Pci Express Mini Card For Wireless Wan - Lenovo ThinkPad T400s Hardware Maintenance Manual

When installing:
• In models with wireless LAN card that has two antenna connectors, plug the gray cable into the jack
labeled MAIN or M, and the black cable into the jack labeled AUX or A on the card. If the computer you
are servicing has three cables, put the white cable in the cable protection tube.
• In models with wireless LAN card that has three antenna connectors, plug the gray cable (MAIN) into
the jack labeled TR1, the white cable (3rd) into jack labeled RO or TR3, and the black cable (AUX) into
jack labeled TR2 on the card.

1060 PCI Express Mini Card for wireless WAN

For access, remove these FRUs in order:
• 1010 Battery pack
Removal steps of PCI Express Mini Card for wireless WAN
Note: Loosen the screws
In step 3 , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the
connectors with your fingers and gently unplug them in direction of the arrow.
1 , but do not remove them.
2
1
.
Chapter 8 Removing and replacing a FRU
73