Escort Shifter ZR3 Installation Manual

Manual
™
SHIFTER ZR3 Comes Complete
Front Laser Shifters Miniature Display Controller
• Twin weather-proof sensors • Display Controller mounts easily to
instrument pod, dashboard, or console.
• 13 foot shielded cables with in-line
grommets • Velcro and adhesive pads provided for
secure mounting
• Universal mounting brackets with
Interface
stainless steel hardware
• Central module connects to switched
12-volt power and ground
• All components plug directly in using
modular connections
• 3M connector taps into existing vehicle
wiring
Escort Inc.
5440 West Chester Road
West Chester, Ohio 45069
©2002 Escort Inc. Escort ® , Passport ® , and Laser Shifter ™ are trademarks of Escort Inc.
Features, specifications and prices subject to change without notice.
Installation
MUTE
REAR POWER FRONT OFF VOL
Rear Laser Shifter
• Weatherproof license plate mounted
sensor
• 30-foot cable with modular connector
Documentation
• Comprehensive Owner's Manual
• Installation Manual
Built-in Diagnostics
• Confirms all components are operational
Sales/Service 800-964-3143
Fax 513-870-8509
www.escortradar.com
Important Notes
Read This First
Please read both sides of these
instructions before starting your
installation.
For the easiest trouble-free
installation,install the Interface
first,and wire it to a 12-volt
switched circuit.
1 A professional installer must
Important Installation
install your new Laser Shifter.
Warnings
Installation of this system requires
experience and expertise in
automotive electronics.Car audio
specialists and many new car
dealers can install the Laser Shifter
for you.
2 Attempting to install this
product without expertise in
automotive electronics installation
can cause personal injury,or
damage to your vehicle.
Since Laser signals will not pass
Performance
through any objects,including
Warning
plastic,it is critical that the Laser
Shifters be mounted perfectly
level,and have an unobstructed
"view"of the road.
Then before installing the other
components,plug all of them into
the Interface and power up the
unit to confirm proper operation.
3 If your vehicle is damaged
during installation,its safety
systems may be compromised,
which could cause personal injury
or property damage.
4 Improper installation may void
Shifter's warranty.
To get the best performance
possible,the mounting location of
the radar receiver is critical.
Although radar signals will pass
through some types of plastic,
mounting the radar receiver so
that it has a clear "view"of the road
will ensure maximum warning.