Color Balance Adjust - Oki C9200 Handy Reference

W
alk-Up Functions (cont.)
Color Balance
Adjust
To set the Color Balance using
the front panel:
1. Press MENU repeatedly
until COLOR MENU
displays.
2. Press ITEM + repeatedly
until

COLOR BALANCE ADJUST

RESET TO DEFAULT
displays.
3. Press SELECT. This restores
factory balance settings,
which form a baseline for
the adjustment.
The Color Balance pattern
prints.
4. Check the color of the center
circle in the printout against
the surrounding circles:
• If the center circle matches
the circles labeled 00, the
color balance is okay. Skip
to step 8.
• If the center circle does not
match circle 00, determine
which surrounding circle
the center circle most
closely matches and note
its number.
16
5. Press VALUE (+ to increase
# value or - to decrease #
value) until
COLOR BALANCE ADJUST
SELECT PATTERN #
displays, where # represents
the number determined in
step 4.
6. Press SELECT.
The new value is engaged
and a new pattern prints.
7. Check the pattern again and
repeat steps 4 through 6
until the color of the center
circle most closely matches
the circles labeled 00.
! The Color Balance
adjustment is subjective, and
it's unlikely that you'll get
an exact match. Repeat steps
4 through 6 up to four times,
then go to step 8.
8. Press ON LINE.
The printer goes back on
line.