Clustering And Fabric Zoning - HP XP20000/XP24000 Configuration Manual

2.
P00 >>> wwidmgr -show adapter
The list of adapters is displayed.
Example
P00>>>wwidmgr -show adapter
item
[ 0]
[ 1]
[9999] All of the above.
3. P00 >>> wwidmgr -set adapter -item xxxx -topology fabric (where -item
xxxx is the item number of the desired FCA taken from the list generated in step 2)
This sets the FCA for the required fabric mode.
NOTE:
An item number of 9999 sets the specified topology on all FCAs in the system.
Example
P00>>>wwidmgr -set adapter -item 1 -topo fabric
4.
P00 >>> wwidmgr -show adapter
The list of adapters is displayed, showing fabric topology.
Example
P00>>>wwidmgr -show ada
item
[ 0]
[ 1]
[9999] All of the above.
5.
P00 >>> initialize
NOTE:
Because a different FCA family is used, Integrity servers do not require setting fabric topology.

Clustering and fabric zoning

If you plan to use clustering, install and configure the clustering software on the servers.
Clustering is the organization of multiple servers into groups. Within a cluster, each server is a node.
Multiple clusters compose a multi-cluster environment. The following example shows a multi-cluster
environment with three clusters, each containing two nodes. The nodes share access to the disk array.
adapter
pga0.0.0.4.6 1000-0000-c920-05ab
pgb0.0.0.8.6 1000-0000-c921-0ce0
adapter
pga0.0.0.8.1 1000-0000-c920-05ab
pgb0.0.0.10.1 1000-0000-c921-0ce0
WWN
WWN
XP Disk Array Configuration Guide: OpenVMS
Cur. Topo Next Topo
FABRIC FABRIC
FABRIC LOOP
Cur. Topo Next Topo
FABRIC FABRIC
FABRIC FABRIC
17