Behavior Of The Ultranav And An External Mouse; Adding The Ultranav Icon To The System Tray - Lenovo ThinkPad Edge E220s User Manual

Behavior of the UltraNav and an external mouse

If you attach an external mouse to a USB connector, you can use the external mouse simultaneously with the
TrackPoint and the touch pad.
Disabling the TrackPoint or the touch pad
If you want to disable the TrackPoint or the touch pad, do either of the following:
Configure settings in UltraNav properties window:
For Windows 7
1. Click Start ➙ Control Panel ➙ Hardware and Sound ➙ Mouse.
2. Click the UltraNav tab.
3. To disable the TrackPoint, clear the check box for Enable TrackPoint.
To disable the touch pad, clear the check box for Enable touch pad.
4. Click OK.
For Windows XP
1. Click Start ➙ Control Panel ➙ Printers and Other Hardware ➙ Mouse.
2. Click the UltraNav tab.
3. To disable the TrackPoint, clear the check box for Enable TrackPoint.
To disable the touch pad, clear the check box for Enable touch pad.
4. Click OK.
Note: You can also open the UltraNav properties window by clicking the UltraNav icon in the task bar. For
details, refer to the instructions in "Adding the UltraNav icon to the system tray" on page 31.

Adding the UltraNav icon to the system tray

For easy access to the UltraNav properties, you can add the UltraNav icon to the system tray.
To enable the display of the UltraNav icon on the system tray, do as follows:
For Windows 7:
1. Click Start, and then click Control Panel.
2. Click Hardware and Sound, and then click Mouse.
3. Click the UltraNav tab.
4. Select the check box for Show UltraNav icon on the system tray.
5. Click OK or Apply.
For Windows XP:
1. Click Start, and then click Control Panel.
2. Click Printers and Other Hardware, and then click Mouse.
3. Click the UltraNav tab.
4. Select the check box for Show UltraNav icon on the system tray.
5. Click OK or Apply.
You can now change the properties of UltraNav by clicking the UltraNav icon on the system tray.
.
Chapter 2 Using your computer
31