Working With The Cli Migration Tool Files; Setting Up The Cli Migration Tool; Execution Of The Cli Migration Tool; Cli Migration Tool Files - HP XP1024 User Manual
Migration user guide for the hp command view xp portfolio and hp xp remote web console (t1780-96005, july 2005)
Hide thumbs
Also See for XP1024:
- Owner's manual (124 pages) ,
- Manual (92 pages) ,
- Operating system configuration manual (70 pages)
Table of Contents
Advertisement
CAUTION:
The array configuration should not be changed through any interface between data collection
and the CLI Migration Tool output file submission to Hdvmcli. The collected data collected might be invalid
if any configuration changes between data collection and the submission of the CLI Migration Tool output
file to Hdvmcli.
Working with the CLI Migration Tool files
Automated installation is not supported for the CLI Migration Tool. Extract a tar file into a specified
directory and then apply the following procedures
tool.
Table 13
CLI Migration Tool files
File name
cmt.cfg
cmt.cfg
cmt.bat
cmt.sh
cmdct.bat
cmdct.sh
CMT_commands_
legacy.xml
CMT_commands_
nonlegacy.xml
cmt.jar
cmdct.jar
Setting up the CLI Migration Tool
Follow these instructions to set up the migration tool:
1.
Untar the migrationtool.tar and extract it to a folder (for example, temp).
2.
Change the configurable parameters (if needed) in the cmt.cfg configuration file under
/temp/migrationtool.
Execution of the CLI Migration Tool
1.
Either set the environment variable RUN_DIR to the working directory or allow the tool to set it to the
current directory.
2.
Run the cmdct batch file under /temp/migrationtool with the ipaddress of the array and type of
array.
NOTE:
The cmdct tool generates the properties file [<array serial number>.properties] and
gives it to the cmt tool with the -p option.
Syntax of cmdct:
cmdct -ip <array ip address> -type <array type>
Example:
cmdct -ip 15.43.212.61 -type 1024
36
CLI migration
Description
Configuration file for the CLI Migration Tool that contain the parameters MAX_LINE,
OS_NAME and TRACE_LEVEL
Configuration file for the CLI Migration Data Collection Tool that contain the parameter
TRACE_LEVEL and TRACE_FILENAME
Batch file to run the CLI Migration Tool in Windows platform
Batch file to run the CLI Migration Tool in non-Windows platform
Batch file to run the CLI Migration Data Collection tool in Windows platform
Batch file to run the CLI Migration Data Collection tool in non-Windows platform
XML file containing Command View CLI commands and equivalent hdvmcli commands
for the XP512/XP48 arrays.
XML file containing Command View CLI commands and equivalent hdvmcli commands
for XP10000/XP12000/XP128/XP1024 arrays
Jar file containing classes for the CLI Migration Tool
Jar file containing classes for the CLI Migration Data Collection Tool
("Setting up the CLI Migration
Tool") before using the
Advertisement
Table of Contents
