HP XP P9500 User Manual page 43

Table 18 RAID Manager Errors Related to Manual Migration Plans (continued)
Error Code Message
(SSB2)
231 1 The migration target volume is already reserved
by Auto LUN.
2312 The migration source volume is online with the
host.
2322 The migration source volume is set as the leaf
volume of Business Copy
2328 The migration target volume is set as the secondary
volume of Business Copy.
232F The migration source volume is already specified
as the target volume of Auto LUN.
2331 Either of the following causes can be considered:
1) The migration source volume is already reserved
by Auto LUN.
2) The number of slots does not match between
the migration target volume and the migration
source volume.
2332 You cannot add pair settings any more to the
volume specified as the migration source.
2333 The volume specified by the migration cancellation
is not a migration source volume
2336 The emulation type does not match between the
migration target volume and the migration source
volume.
2337 The migration source volume is a leaf volume of
Business Copy.
233B The migration target volume is a primary volume
of Business Copy.
233C The migration target volume is a secondary volume
of Business Copy.
2342 The migration target volume is already specified
as the target volume of Auto LUN.
2343 The migration target volume is set as the primary
volume of Business Copy.
2344 The volume specified by the migration cancellation
is not a migration target volume
2346 The migration target volume is a primary volume
of Continuous Access Synchronous.
2347 The migration target volume is a secondary volume
of Continuous Access Synchronous.
234B The migration target volume is already specified
as the source volume of Auto LUN.
2350 The migration source volume is not paired with
the migration target volume.
2351 The migration source volume and the migration
target volume are set to the same volume.
Required Action
Cancel the reservation by Auto LUN, and then
migrate the volume.
Make the migration source volume off-line from
the host, and then migrate the volume.
Release the Business Copy pair, and then migrate
the volume.
Release the Business Copy pair, and then migrate
the volume.
Release the volume from Auto LUN, and then
migrate the volume.
Perform the following actions, respectively:
1) Cancel the reservation by Auto LUN, and then
migrate the volume.
2) None. This migration plan cannot be executed.
Reduce the number of pair settings of the specified
volume, and then migrate the volume.
None. The specified volume is not a source
volume.
None. This migration plan cannot be executed.
Release the Business Copy pair, and then migrate
the volume.
Release the Business Copy pair, and then migrate
the volume.
Release the Business Copy pair, and then migrate
the volume.
Release the volume from Auto LUN, and then
migrate the volume.
Release the Business Copy pair, and then migrate
the volume.
None. The specified volume is not a target volume.
Release the Continuous Access Synchronous pair,
and then migrate the volume.
Release the Continuous Access Synchronous pair,
and then migrate the volume.
Release the volume from Auto LUN, and then
migrate the volume.
None. This migration plan cannot be deleted or
canceled.
None. This migration plan cannot be executed,
deleted, or cancelled.
Troubleshooting when using RAID Manager 43